Table of Contents
Advertisement
Use the
from the Setup program without changing any settings.
When exiting and the menu asks if you want to discard
configuration changes and exit now, be sure the menu's
"Yes" field is highlighted.
If you make a mistake changing settings and you need to
change them again, press
Setup program. When the Setup Confirmation menu asks
you if you want to discard configuration changes and exit
now, press the Tab key or the right arrow key to highlight
the menu's "No" field. With this choice, you remain in the
Setup program, and you can continue to change settings, if
necessary. Press
Maintenance Menu
This menu allows you to set the processor speed and clear
the Setup passwords. Setup displays this menu only when
the system is in configure mode. See Chapter 6 for
information on putting the system in configure mode. There
are two options available.
T
Processor Speed
This field specifies your processor's speed. Options are
350 and 400.
T
Clear All Passwords
This field lets you clear the user and administrator
passwords.
Main Menu
The Main Menu options are described in the following
sections.
4-4 System BIOS and Utilities
key to return to a previous menu or to "escape"
Esc
from anywhere within the
Esc
Enter
to confirm.
Advertisement
Table of Contents
