EXCELL PRECISION CO., LTD.
Chapter 2 External Function Setting
In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to
enter the External Function setting mode. The LCD shows
Press ON/ZERO key
Press ON/ZERO key
Press ON/ZERO key
Press ON/ZERO key
Refer to the following sections for the detailed operation
procedures of each function setting.
02005324
⇒ General Function setting mode
⇒ External Weight Calibration
⇒ Function Reserved
⇒ Exit the Advanced Function setting mode
10
Press UNITS key
Press UNITS key
Press UNITS key
Press UNITS key
.
ZSME300000255