Holding And Re-Accepting A Call On A Line Key; Exclusively Holding And Re-Accepting A Call On A Line Key - Siemens OpenStage 40 HFA HiPath 4000 Operation Manual

Making Calls via Multiple Lines
Step by step
Hold?
Private hold?
100
Holding and re-accepting a call on a
line key
Prerequisite: You have accepted a call on a line key
( page 90) or you are conducting a consultation call.
S
Briefly press the line key you are currently using,
or
Select and confirm.
The line key where the call is on hold flashes slowly. The
call can be continued on any phone in the team where
the LED for this line key is flashing.
Re-accepting
T
Press the blinking line key. Proceed with your call.
Exclusively holding and re-accepting a
call on a line key
Prerequisite: You have accepted a call on a line key or
you are conducting a consultation call that only you can
or wish to continue.
S
Press the programmed sensor key "Excl. Hold".
or
Select and confirm.
The line key where the call is parked, flashes slowly.
The call can be continued on your phone only and is
not signaled on any other phone.
Re-accepting
T
Press the blinking line key. Proceed with your call.