System-Wide Speaker Call - Siemens OpenStage 40 HFA HiPath 4000 Operation Manual

Making Calls – Convenience Functions
Step by step
j
Enter code!
n
62

System-wide speaker call

You can place a speaker call from your phone to any in-
ternal party with a telephone equipped with speaker-
phone mode or a loudspeaker.
Speaker call to a variable destination
Prerequisite: The "Speaker call-one-way" sensor key is
programmed.
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
Enter the system code for "Speaker call-one-way" (con-
tact the relevant service personnel if necessary).
or
S
Press the "Spkr. 1-way" programmable sensor key.
j
Enter the internal number of the party.
A connection is immediately established to this destina-
tion station's loudspeaker if
• the station is not busy
• the handset has not been lifted
• "Speaker call protect" is not activated
Z
The caller hears a confirmation tone when the connec-
tion is established and they are free to start speaking.
^
The called party can accept the connection by lifting the
handset.
S
or If the called party presses the speaker key or the line
key (if configured), the connection is lost.
The same number of speaker calls and normal
connections is possible.