Table of Contents
Advertisement
USB Configuration
This section is used to configure parameters of the USB device.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
USB Confi guration
USB Module Version
8.11.01
USB Devices:
1 Keyboard, 1 Mouse, 1 Hub
Legacy USB Support
[Enabled]
USB Mass Storage Driver Support
[Enabled]
Version 2.16.1242 Copyright (C) 2013 American Megatrends, Inc.
Legacy USB Support
Enabled
Enable legacy USB.
Auto
Disable support for legacy when no USB devices are connected.
Disabled
Keep USB devices available only for EFI applications.
USB Mass Storage Driver Support
Enable or disable the support of the USB Mass Storage Driver.
Chapter 3 BIOS Setup
Chapter 3
Enables Legacy USB
support. AUTO option
Table 1. OS Selection
disables legacy support if
no USB devices are
connected. DISABLE
option will keep USB
devices available only for
EFI applications.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
Table 2. The Type of USB Ports
25
Important:
When installing Windows 7, only native USB 2.0 devices (USB port 0 to USB port 3)
can operate under DOS mode. Please refer to the following tables for more infomation
on the type of USB ports.
Operation
Environment
DOS
Windows 7
for Customers
OS Selection
in the BIOS
Windows 8.x
Windows 7
Advanced Menu
When installing Windows 7 fi rst
Available USB
time, only native USB 2.0 ports
All
ports
can work. Please refer to the
USB type in table 2 below.
Model Name
BT700
Native
USB 3.0
(share with USB 2.0 port 6 and 7)*
USB 0
Native
USB 1
Native
Native
USB 2
Native
USB 3
USB 4
HSIC port 0
USB 5
HSIC port 1
HSIC port 2
USB 6
(share with USB 3.0)*
HSIC port 3
USB 7
(share with USB 3.0)*
Note:
*Optional and is not supported in standard model. Please contact your sales represen-
tative for more information.
Windows 8.x
Linux
Windows 8.x
Windows 8.x
All
All
www.dfi .com
Advertisement
Table of Contents
