Table of Contents
Advertisement
SATA Configuration
This section is used to configure the settings of SATA device.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
SATA Confi guration
Serial-ATA (SATA)
[Enabled]
Serial-ATA Port 0
[Enabled]
Serial-ATA Port 1
[Enabled]
SATA Port0
Not Present
SATA Port1
Not Present
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Serial ATA Port 0 and 1
This field is used to enable or disable the Serial ATA port 0 and 1.
Chapter 3 BIOS Setup
Chapter 3
LPSS & SCC Configuration
This section is used to configure the LPSS & SCC settings.
Enable/Disable Serial
ATA
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
22
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
LPSS Confi guration
LPSS I2C #1 Support
[Enabled]
LPSS HSUART #1 Support
[Enabled]
LPSS HSUART #2 Support
[Enabled]
LPSS SPI Support
[Enabled]
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
LPSS I2C #1 Support
Enable or disable the support of the LPSS I2C device.
LPSS HSUART #1/#2 Support
Enable or disable the support of the LPSS HSUART device.
LPSS SPI Support
Enable or disable the support of the LPSS SPI device.
LPSS I2C #1 Support
Enable/Disable
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Reset
ESC: Exit
www.dfi .com
Advertisement
Table of Contents
