Figure 24-3 Remote Node Network Layer Options; Table 24-2 Remote Node Network Layer Options - ZyXEL Communications Prestige 792H User Manual

Prestige 792H User's Guide
IP Options:
FIELD
IP Options
IP Address Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
Assignment node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the ISP
node (also the one you configure in Menu 4). All other nodes are set to
Static.
Rem IP Addr This is the IP address you entered in the previous menu.
Rem Subnet Type the subnet mask assigned to the remote node.
Mask
My WAN Some implementations, especially UNIX derivatives, require separate IP
Addr network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the IP
address assigned to the WAN port of your Prestige.
This address refers to the local Prestige address, not the remote router
address.
24-6
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies= 3,4,5,6
Press ENTER to Confirm or ESC to Cancel:

Figure 24-3 Remote Node Network Layer Options

Table 24-2 Remote Node Network Layer Options

Bridge Options:
Ethernet Addr Timeout (min)= N/A
DESCRIPTION EXAMPLE
Dynamic
Remote Node Configuration