Figure 33-4 Tcp/Ip And Dhcp Ethernet Setup; Figure 33-5 Remote Node Network Layer Options - ZyXEL Communications Prestige 792H User Manual

Prestige 792H User's Guide
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies= 2,4,7,9
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Go to menu 11.3 (shown next) and type the number(s) of the IP Routing Policy set(s) as appropriate. You
can cascade up to four policy sets by typing their numbers separated by commas.
IP Options:
IP Address Assignment= Static
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies= 2,4,7,9
Press ENTER to Confirm or ESC to Cancel:
33-6

Figure 33-4 TCP/IP and DHCP Ethernet Setup

Menu 11.3 - Remote Node Network Layer Options

Figure 33-5 Remote Node Network Layer Options

Bridge Options:
Ethernet Addr Timeout (min)= 0
Type IP Policy
sets here.
Type IP
Policy sets
here.
IP Policy Routing