Table 22-2 Tcp/Ip And Dhcp Ethernet Setup - ZyXEL Communications Prestige 792H User Manual

FIELD
DHCP Setup
DHCP
Client IP Pool Starting
Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS
Server
Remote DHCP Server
TCP/IP Setup
IP Address
IP Subnet Mask
RIP Direction
Version
LAN Setup

Table 22-2 TCP/IP and DHCP Ethernet Setup

If set to Server, your Prestige can assign IP addresses, an IP
default gateway and DNS servers to Windows 95, Windows
NT and other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server
and relays DHCP requests and responses between the
remote server and the clients. Enter the IP address of the
actual, remote DHCP server in the Remote DHCP Server in
this case.
When DHCP is used, the following items need to be set:
This field specifies the first of the contiguous addresses in the
IP address pool.
This field specifies the size or count of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and
the subnet mask.
If Relay is selected in the DHCP field above then enter the IP
address of the actual remote DHCP server here.
Enter the (LAN) IP address of your Prestige in dotted decimal
notation
Your Prestige will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are
implementing subnetting, use the subnet mask computed by
the Prestige.
SPACE BAR
Press [ ] to select the RIP direction. Choices are
Both, In Only, Out Only or None.
SPACE BAR]
Press [
RIP-1, RIP-2B or RIP-2M.
DESCRIPTION
to select the RIP version. Choices are
Prestige 792H User's Guide
EXAMPLE
Server
(default)
192.168.1.33
32
192.168.1.1
255.255.255.
0
Both
(default)
RIP-1
(default)
22-5