Table 14-13 Sample Ike Key Exchange Logs - ZyXEL Communications Prestige 792H User Manual

Prestige 792H User's Guide
This screen is useful for troubleshooting. A log index number, the date and time the log was created and a log
message are displayed.
Double exclamation marks (!!) denote an error or warning message.
The following table shows sample log messages during IKE key exchange.
LOG MESSAGE
Cannot find outbound SA for rule
<#d>
Send Main Mode request to <IP>
Send Aggressive Mode request to <IP>
Recv Main Mode request from <IP>
Recv Aggressive Mode request from
<IP>
Send:<Symbol><Symbol>
Recv:<Symbol><Symbol>
Phase 1 IKE SA process done
Start Phase 2: Quick Mode
!! IKE Negotiation is in process
!! Duplicate requests with the same
cookie
!! No proposal chosen
!! Verifying Local ID failed
!! Verifying Remote ID failed
14-28

Table 14-13 Sample IKE Key Exchange Logs

DESCRIPTION
The packet matches the rule index number (#d), but
Phase 1 or Phase 2 negotiation for outbound (from the
VPN initiator) traffic is not finished yet.
The Prestige has started negotiation with the peer.
The Prestige has received an IKE negotiation request
from the peer.
IKE uses the ISAKMP protocol (refer to RFC2408 –
ISAKMP) to transmit data. Each ISAKMP packet
contains payloads of different types that show in the
log - see Table 14-15.
Phase 1 negotiation is finished.
Phase 2 negotiation is beginning using Quick Mode.
The Prestige has begun negotiation with the peer for
the connection already, but the IKE key exchange has
not finished yet.
The Prestige has received multiple requests from the
same peer but it is still processing the first IKE packet
from that peer.
The parameters configured for Phase 1 or Phase 2
negotiations don't match. Please check all protocols
and settings for these phases. For example, one party
may be using 3DES encryption, but the other party is
using DES encryption, so the connection will fail.
During IKE Phase 2 negotiation, both parties
exchange policy details, including local and remote IP
address ranges. If these ranges differ, then the
connection fails.
VPN Screens