ZyXEL Communications Prestige 792H User Manual page 274

Prestige 792H User's Guide
FIELD
Rem Password
Outgoing:
My Login
My Password
Route
Bridge
Edit IP/Bridge
Edit ATM Options
Telco Option
Allocated Budget (min)
Period (hr)
24-4
Table 24-1 Remote Node Profile
Type the password used when this remote node calls
your Prestige.
Type the login name assigned by your ISP when the
Prestige calls this remote node.
Type the password assigned by your ISP when the
Prestige calls this remote node.
Authen This field sets the authentication protocol used for
outgoing calls. Options for this field are:
CHAP/PAP – Your Prestige will accept either CHAP or
PAP when requested by this remote node.
CHAP – accept CHAP (Challenge Handshake
Authentication Protocol) only.
PAP – accept PAP (Password Authentication Protocol)
only.
This field determines the protocol used in routing.
Options are IP and None.
When bridging is enabled, your Prestige will forward any
packet that it does not route to this remote node;
otherwise, the packets are discarded. Select Yes to
enable and No to disable.
Press [SPACE BAR] to select Yes and press [ENTER]
to display Menu 11.3 – Remote Node Network Layer
Options.
Press [SPACE BAR] to select Yes and press [ENTER]
to display Menu 11.6 – Remote Node ATM Layer
Options.
This sets a ceiling for outgoing call time for this remote
node. The default for this field is 0 meaning no budget
control.
This field is the time period that the budget should be
reset. For example, if we are allowed to call this remote
node for a maximum of 10 minutes every hour, then the
Allocated Budget is (10 minutes) and the Period (hr)
is 1 (hour).
DESCRIPTION EXAMPLE
CHAP
IP
No
No
No
10
1
Remote Node Configuration