Figure 3-2 Wizard Screen: Internet Access; Table 3-1 Wizard Screen: Wan Setup - ZyXEL Communications Prestige 792H User Manual

LABEL
Service Type Select Client if your Prestige will act as a client device or Server if your Prestige will act as
a server (see Service Type).
Transfer Rate
Rate Adaption If you enable Rate Adaption, the Prestige connects at the optimal transfer rate between the
min and max rates below. If you disable Rate Adaption, the Prestige attempts to connect at
the maximum transfer rate configured. If that rate can't be attained, the connection does not
succeed.
Max Rate Select transfer rates from the Max Rate and Min Rate drop-down list boxes. For back-to-
back applications make sure that your Prestige and its peer have the same Transfer Max
Min Rate
Rate and the same Transfer Min Rate.
Standard If your Prestige is a server, then select the mode that applies to your region: ANSI American
Mode National Standards Institute) and ETSI (European Telecommunications Standards Institute).
If your Prestige is a client, select the same Standard Mode that the server side selects.
Next Click this button to go to the next wizard screen.
The following table describes the labels in this screen.
Wizard Setup

Table 3-1 Wizard Screen: WAN Setup

Figure 3-2 Wizard Screen: Internet Access

DESCRIPTION
Prestige 792H User's Guide
3-5