By 2 Point-To-Point Arming (Closing) Codes - Linear REMOTE ACCESS SOFTWARE DUAL-824 Software Manual

Remote access software ra-2400 for supervised wireless security systems

Table of Contents

4.13.3

4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES

PURPOSE:

To view and edit the force arming report code. This report is sent when

force arm is enabled (Section 4.12) and the system is armed with any

open sensors that have been bypassed.

☞ NOTE: With either reporting method, the force arming code is the

same.

USER RESPONSE:

ACCESS CODES (CLOSE)

✦ FORCE-ARM: Enter a new two-digit force arming code if it needs to

be changed.

☞ NOTE: Entering a "0" for a force arming code will prevent it from

reporting.

Table of Contents

Do you have a question about the REMOTE ACCESS SOFTWARE DUAL-824 and is the answer not in the manual?