Table of Contents
Advertisement
4
From "LAN Port", select the LAN port connected to the same network as the network camera and computer
where the client tools are installed.
5
Click Browse.
6
Choose a folder for recorded video, then click OK.
Note: Use a folder with at least 100 GB of available space.
7
Click OK.
8
Click OK.
9
Move the surveillance cameras switch to the
Notes:
• If the target shared folder specified as the storage location for recorded video is deleted, the surveillance
camera is automatically disabled.
• Do not directly edit recorded video data in the shared storage folder. If a file is directly edited, the surveillance
camera may no longer operate properly.
• Do not duplicate or back up the recorded videos with the backup or replication functions in the TeraStation's
Settings. A separate backup license must be purchased to back up this data to another TeraStation.
• The client tools can only be used with the LAN connected to the selected LAN port.
Use with Two or More Network Cameras
In the default settings, only one network camera can be used. To use two or more network cameras, additional
licenses (sold separately) must be purchased and registered. For more details to add licenses and registration, see
"Activating Additional Licenses" section.
position to enable surveillance cameras.
86
Advertisement
Table of Contents
