Table of Contents
Advertisement
4
Select the drive or array where the volume will be created and click Enable LVM on Volume.
Notes:
• Enabling LVM before using a drive as an iSCSI drive is optional. If LVM is not enabled, you can still create an
iSCSI volume from the entire drive. However, enabling LVM is recommended for drives that will be used for
iSCSI.
• If the LVM settings are changed, all data on the volume will be erased. Before changing the settings, back up
any important data.
5
The "Confirm Operation" screen will appear. Enter the confirmation number, then click OK.
6
Click Close.
7
Move the iSCSI switch to the
8
Click
to the right of "iSCSI".
9
Click Create Volume.
10
Enter a volume name, volume description, volume, and size, then click OK.
11
Enter the confirmation number and click OK.
12
Click Close.
position to enable iSCSI.
49
Advertisement
Table of Contents
