Table of Contents
Advertisement
Note: If the TeraStation is being used as an iSCSI hard drive, to change the settings, navigate to Drives - iSCSI in
Settings and move the iSCSI switch to the
1
In Settings, click Management.
2
Click
to the right of "Name/Time/Language".
3
Click Edit.
4
Click the Name tab, then configure the TeraStation's name and description.
5
Click the Time tab.
Click Use Local Date/Time to use your computer's time settings for the TeraStation.
By default, the TeraStation adjusts its clock automatically by using a default NTP server. This NTP server belongs
to Internet Multi Feed Inc. For more information, visit http://www.jst.mfeed.ad.jp.
To use a different NTP server, select Name/Time/Language from Management. Click Time, then Edit. Uncheck
"Use Default NTP Server" and enter a new NTP IP address. Click OK.
If NTP is not used, enter the time and date manually. Click Use Local Date/Time to import the time and date
from your computer.
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
TeraStation.
Note: The internal clocks of the TeraStation and other devices on your network may run at slightly different
speeds. Over a long period of time your network devices may show somewhat different times, which can cause
position temporarily before changing settings.
135
Advertisement
Table of Contents
