Table of Contents
Advertisement
Advanced iSCSI Settings
Advanced settings for iSCSI are available in Settings. Navigate to Drives - iSCSIand click on your volume name.
Advanced Settings will be at the bottom left of the window. The default values for each of these settings are
recommended for most users.
Install the Microsoft iSCSI Software Initiator
Windows XP, Windows Server 2003
Before using iSCSI equipment with Windows XP or Windows Server 2003, download and install the "Microsoft iSCSI
Software Initiator".
1
Go to http://www.microsoft.com.
2
Search for "Microsoft iSCSI Software Initiator".
3
Download the latest version of the Microsoft iSCSI Software Initiator.
4
When the download is complete, double-click on the installer. Check the "Initiator Service" and "Software
Initiator" checkboxes.
5
Step through the wizard to install.
Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows Server 2012, Windows Server 2008
If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows Server 2012, or Windows Server 2008
the Microsoft iSCSI Software Initiator is already installed on your computer. You don't need to download and install
it.
iSCSI Setup
To use the TeraStation as an iSCSI hard drive, configure it as described below.
1
Connect the TeraStation's Ethernet and power cables and configure the TeraStation's IP address and its clock.
2
In Settings, click Drives.
3
Click
to the right of"LVM".
48
Advertisement
Table of Contents
