Table of Contents
Advertisement
14
Click on the External Users tab and select the level of access for each external user.
: Read and write access allowed
15
Click OK.
Notes:
• Users that are automatically registered belong to the "hdusers" group. They can be added to other groups
from within groups settings. Added users will be listed in "Users" - "External Users". To delete a user that was
registered automatically, select that user and click Delete External User.
• If both read-only and read & write permissions are given to a user, the user will have read-only access.
• OS X 10.4 or earlier and Windows Server 2012 are not supported with external authentication.
• To access access-limited shared folders from OS X 10.7, use AFP instead of SMB, under "LAN Protocol
Support", check "AFP (Mac)" on the destination folders to use AFP.
• If access restrictions are set for users and groups from the authentication server, guest and anonymous
connections will not be possible with AFP connections.
• FTP connections do not support authentication with an external SMB server.
• If using a Windows PC for external authentication, the default Windows SMB security settings may need to
be changed. An easy way to do this is to run the File Sharing Security Level Change Tool, available from this
product's download page on www.buffalotech.com. This utility will let you easily change or restore your
Windows security settings to work with external authentication.
Converting Local Users into External Users
If using an external SMB server for authentication, you may convert any local users into external users. This way, the
TeraStation will have a user list that matches the users in the external SMB server, and access restrictions for this
TeraStation's shared folders may be assigned to the converted "external" users.
Follow the steps below to convert a local user into an external user. If a local user is converted, their user information
(including passwords) will be removed from the TeraStation. External users cannot be reverted to local users.
Note: External authentication should be enabled before local users can be converted. For more information on
external authentication, refer to the "User Authentication with an External SMB Server" section above.
1
In Settings, click File Sharing.
2
Click
to the right of "Users".
3
In the user list screen, check any users to be converted to an external user, then click Convert to External User.
4
Enter the confirmation number and click OK.
5
The confirmation dialog appears. Enter the displayed number and click OK.
Converted users are displayed under the "External Users" tab. You can then configure access restrictions for external
users.
: Read access allowed
30
: Access prohibited
Advertisement
Table of Contents
