Table of Contents
Advertisement
• If using the iSCSI Initiator from Windows 8.1, Windows 8, Windows 7, Windows Vista, or Windows Server 2008,
configure the CHAP login information to allow searching for or connecting to targets.
6
Click Close.
Setting Access Restrictions for Individual Volumes
1
In Settings, click Drives.
2
Click
to the right of "iSCSI".
3
Click the volume where you want to set the access restrictions.
4
Enable "Access Restrictions", enter the username and password, then click OK.
5
Click Close.
Mutual Authentication Access Restrictions by Username and Password
To set access restrictions using mutual authentication in addition to regular access restrictions, configure the
settings as shown below.
• In the screen above, check "Mutual Authentication" and enter the password in the "Mutual Authentication
Password" field.
• In the "User Authorization" screen displayed when the TeraStation is connected, select "Enable Mutual
Authentication".
• The entry screen for the mutual authentication password will be displayed again. Enter the password.
• If using the iSCSI Initiator included with Windows 8.1, Windows 8, Windows 7, Windows Vista, or Windows Server
2008, set the CHAP login information for target searches and connections.
Mutual Authentication Access Restrictions by IP Address
To set access restrictions by IP address, enable "IP Address Restrictions" as shown above, enter the IP addresses that
will be allowed access in the "IP Address List", and click OK.
54
Advertisement
Table of Contents
