Table of Contents
Advertisement
6
Select the shared folder that will be the replication source, then click OK.
7
Click Browse under "Replication Target".
8
Select the shared folder that will be the replication target, then click OK.
9
Click OK.
10
Click Yes.
Notes:
• During setup, you may choose to encrypt and/or compress replication data. Encrypted data will transferred
securely on the network. Compressed data will ease network loading and is recommended for slow or heavily
loaded network connections. Either will increase the CPU load on the source TeraStation. Encrypted and
compressed data will be unencrypted and decompressed on the target TeraStation.
• For best results, add replication jobs one at a time. Multiple replication jobs may take some time to complete.
• A maximum of 64 shared folders can be configured for replication.
• Shared folders with a backup password set cannot be selected as replication targets.
• Replication source data is copied using a differential overwrite to the replication target folder. Note that any
data that is not in the replication source will be overwritten.
• Replication can also be used to copy all data from a share to a share on an attached external drive. Format
the drive with ext3 or XFS before using it for replication. Drives with FAT32 partitions are not supported with
replication.
• You can select subfolders as the replication source. Folders whose names contain more than 80 alphanumeric
characters cannot be selected.
63
Advertisement
Table of Contents
