Table of Contents
Advertisement
considerably. For help configuring your NetWare, Linux, or other UNIX clients for NFS support, please consult
each client's own documentation and support.
1
In Settings, click File Sharing.
2
Click
to the right of "Folder Setup".
3
Choose the shared folder that will be accessible to the NFS client.
4
Click Edit.
5
Under "LAN Protocol Support", enable "NFS" and click OK.
Note the NFS path. It will be used later for accessing data from an NFS client.
6
Click Close.
7
Move the NFS switch to the
8
Click
to the right of "NFS".
9
Click Client Settings.
10
Click Add Client.
11
Enter the IP address and hostname of the NFS client, then click OK.
Note: To delete the client, check the hostname and click Delete Client.
12
Click Close.
13
Enter the mount command to access the shared folder from the NFS client.
The mount command depends on your operating system. The examples below assume that IP address of your
TeraStation is 192.168.11.10, "/mnt/array1/share" is the desired NFS path, and "/mnt/nas" or drive letter "z" is
the mount point.
For Linux:
mount -t nfs 192.168.11.10:/mnt/array1/share /mnt/nas
For Windows Service for Unix 3.5:
mount 192.168.11.10:/mnt/array1/share z:
For Solaris 10:
mount -F nfs 192.168.11.10:/mnt/array1/share /mnt/nas
position to enable NFS.
125
Advertisement
Table of Contents
