Triggering Or Clearing Alarm Output Manually - HIKVISION DS-7300HI-ST Series User Manual

User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR
8.7 Triggering or Clearing Alarm Output
Manually
Purpose:
Sensor alarm can be triggered or cleared manually. If "Manually Clear" is selected in the dropdown list of dwell
time of an alarm output, the alarm can be cleared only by pressing Clear button in the following interface.
Steps:
Select the alarm output you want to trigger or clear and make related operations.
Menu> Manual> Alarm
Press Trigger/Clear button if you want to trigger or clear an alarm output.
Press Trigger All button if you want to trigger all alarm outputs.
Press Clear All button if you want to clear all alarm output.
Figure 8.23 Clear or Trigger Alarm Output Manually
139