Shut Down The Unit - NUUO NVRmini 2 User Manual

3. Check the Reboot option.
4. Click the OK button.
5. A confirmation dialog pops up. Click the OK button to reboot the unit.
The restart procedure runs automatically. When the unit is fully online:
The System Status LED turns blue.

The buzzer beeps one time

During system restart, none of your files will be accessible from your
desktops/laptops.

2.7.9 Shut down the Unit

The only time you need to shut down the unit is to replace the disk drive
cooling fan or the power supply. During and after the shutdown, none of your
files will be accessible from your desktops/laptops. There are two ways to shut
down the unit.
Shut down by Software

1. Open Internet Explorer and log in to the unit.
2. Click System / Reboot / Shut down.
3. Check the Shut down option.
4. Click the OK button.
5. A confirmation dialog pops up. Click the OK button to shut down the unit.
Direct Shutdown

1. Open the lid of the unit.
2. Press and hold the power button for 2 seconds and release your hands
when the buzzer is beeping once.
3. System will begin the shut down process, which takes about 30 seconds to
few minutes depends on number of recording channels and other factors.
(if the buzzer is enabled).
71