Restore All Default Configuration; Install Activex - NUUO NVRmini 2 User Manual

3. Press and hold the reset button for 8 seconds, release your hands until the
buzzer beeps one time and the System Status LED flashes in blue.
4. System will restart and the Administrator's password is now reset to
admin.

13.5 Restore All Default Configuration

If you want to restore all configurations to default setting, follow the following
steps.
1. Verify that the system is fully booted.
2. Insert your reset tool into the reset button hole on the back of the device.
3. Press and hold the reset button for 14 seconds, release your hands until
the buzzer beeps twice and the System Status LED flashes in orange.
4. System will restart and all settings are reset to default.
RAID volume and data within the volume won't be reset to default. Refer to
for the details.

13.6 Install ActiveX

If you cannot see the complete page of the system when using Internet
Explorer, it may be because the ActiveX installation process is not completed.
1. Open Internet Explorer and log in to the unit.
2. Click the Live view / Playback button on the top right.
3. The browser will ask whether to install ActiveX.
157
Format