Set Up 2Nd Stream - NUUO NVRmini 2 User Manual

The intelligent surveillance solution
Hide thumbs Also See for NVRmini 2:
Table of Contents

Advertisement

ImmerVision and Vivotek (FE8171V). Generic Dewarp is a general
method, which done by software technique, and it's suitable for most
fisheye cameras. You are not allowed to select type so far, type depends
on camera model.
Lens: Enable or disable lens function.
Camera
Position: Select the position of the camera.
If users enable the lens while lens is not installed correctly or not even installed, a
warning message will pop up as a notification if users are trying to operate lens on
liveview page.

2.1.6 Set up 2nd Stream

Stream profile is designed for mobile client and lower fps live stream display.
Without stream profile integration, users cannot watch live video on mobile
client nor select lower fps stream on live view. Further, for performance
consideration, we fix the resolution and frame rate for each brand/series.
Refer to
camera support
1. Open Internet Explorer and log in to the unit.
2. Click IP Camera / Camera Parameters.
3. Click the 2nd Stream Settings tab.
Stream
Profile: Enable to watch live video on mobile client or select
lower fps stream on live view. (default: enabled)
Low
Profile: The stream profile, under 300kbps, is designed for mobile
client single-view.
Minimum
list.
Profile: The stream profile, under 100 kbps, is designed for
22

Advertisement

Table of Contents
loading

Table of Contents