Auto Port-Forwarding - NUUO NVRmini 2 User Manual

the name of your unit. Log in again after configuration activated.
Internet Interface

which LAN is connected to the internet, which implies that there is no
longer to fix the Internet access to LAN 1 for sending mails, activating
license online, receiving auto upgrade notification, etc.
Internet Protocol: Choose to obtain an IP address from external DHCP

server automatically, or configure the IP address manually.
IP Address: IP address of this unit.

Subnet Mask: Subnet mask address.

Default Gateway IP

Primary DNS: Primary DNS (Domain Name System) address.

Secondary

There are two Giga LANs in 4bay unit. We recommend using them under the scenario
of two subnets, one is for cameras/devices, and the other is for remote access. If you
deploy two LANs on the same subnet, it's likely to make parts of camera disconnected
as either one of LAN is disconnected.
4. Click the DDNS Setup tab to enable Dynamic Domain Name Server
function, allowing you to connect unit with dynamic IP address.

2.5.3 Auto Port-Forwarding

This function is designed for saving time in port configuration on router if users
want to access the unit (in LAN) from WAN. Once enabling UPnP Service on
router, users can do port-forwarding for setting page (default: 80), liveview
(default: 5150), playback (default: 5160), and CMS (default: 5170)
automatically.
(WAN): The selection is for 4bay unit to choose
Address: Gateway IP address.
DNS: Secondary DNS address.
50