Led Reference; Schlage Button; Optional Inside Push Button (Ipb); Troubleshooting - Schlage CO-250 CORE SERIES User Manual

Most LED and beep indicators are confi gured using the HHD. See the Schlage Utility Software (SUS)
User Guide for more information.

Schlage Button

Access denied
Access denied, user outside time zone
Factory default reset
Low battery indicator, AA batteries
Low battery indicator, coin cell
Momentary unsecured access
Toggle unsecured
Toggle secure (relocking)
HHD authentication
USB active with no physical connection
Waiting for PIN (Card + PIN)

Optional Inside Push Button (IPB)

Offi ce Mode –Allows lock to toggle between locked (normal) and unlocked state
Press IPB to lock
Press IPB to unlock
Privacy Mode – Allows the lock to toggle between normal access and a state in which normal
credentials are ignored
With door closed, press IPB to engage privacy
With door closed, press IPB to release privacy
1 Unlocking the lock with the IPB will cause the lock to remain unlocked until the IPB is depressed again.
2 On locks confi gured with a mortise-deadbolt, throwing the deadbolt will also engage privacy.
3 If DPS is used, then opening door will also release privacy. If a mortise-deadbolt is used, then retracting the
deadbolt will also release privacy.
For troubleshooting, visit www.schlage.com/support.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.

LED REFERENCE

Condition
Action
1

TROUBLESHOOTING

FCC STATEMENTS

2 red blinks
4 red blinks
One-second solid green with one-second beep
9 left red blinks
9 right red blinks
1 green blink, then one red blink on relock
2 green blinks
1 red blink
Left green solid
Left green blinking
Mode 0 only: 5 left red with right green blinks
then solid right green.
1 red blink
1 green blink
2 4 green blinks
3
4 red blinks
Lights
Lights
© 2010 Ingersoll-Rand Company
P516-272 ENG online Rev. 08/10-b