Battery Failure Modes; Led Reference; Schlage Button; Optional Inside Push Button (Ipb) - Schlage CO-250 User Manual

Battery failure modes

The battery failure mode is set using the SUS. See the SUS user guide for more
L
information.
Mode
Fail As-Is (default)
Fail Unlocked
Fail Locked
Most LED and beep indicators are configured using the SUS. See the Schlage Utility
Software (SUS) user guide for more information.

Schlage button

Access denied
Access denied, user outside time zone
Factory default reset
Low battery indicator, AA batteries
Low battery indicator, coin cell
Momentary unsecured access
Toggle unsecured
Toggle secure (relocking)
SUS authentication
USB active with no physical connection
Waiting for PIN (Card + PIN)
An incompatible reader is on the lock

Optional Inside Push Button (IPB)

Office Mode –Allows lock to toggle between locked (normal) and unlocked state
Press IPB to lock
Press IPB to unlock
Privacy Mode – Allows the lock to toggle between normal access and a state in which
normal credentials are ignored
With door closed, press IPB to engage
privacy
2
With door closed, press IPB to release
privacy
3
1 Unlocking the lock with the IPB will cause the lock to remain unlocked until the IPB is depressed again.
2 On locks configured with a mortise-deadbolt, throwing the deadbolt will also engage privacy.
3 If DPS is used, then opening door will also release privacy. If a mortise-deadbolt is used, then retracting the
deadbolt will also release privacy.
Lock remains in current state until batteries are replaced.
Lock unlocks and remains unlocked until batteries are replaced.
Lock locks and remains locked until batteries are replaced.
Condition
Action
1
Description

LED reference

2 red blinks
4 red blinks
One-second solid green with one-second
beep
9 left red blinks
9 right red blinks
1 green blink, then one red blink on relock
2 green blinks
1 red blink
Left green solid
Left green blinking
5 left red with right green blinks then solid
right green.
2 red blinks and 2 beeps with each card or
key press, or 5 red blinks and 5 beeps on
power-up
1 red blink
1 green blink
4 green blinks
4 red blinks
Lights
Lights
9