Led Reference; Schlage Button; Inside Push Button (Ipb); Troubleshooting - Schlage AD-250 User Manual

Most LED and beep indicators are configured using the HHD. See the Schlage Utility Software User
Guide for more information.

Schlage Button

Access denied
Access denied, user outside time zone
Factory default reset
Low battery indicator, AA batteries
Low battery indicator, coin cell
Momentary unsecured access
Toggle unsecured
Toggle secure (relocking)
HHD authentication
USB active with no physical connection
Waiting for PIN (Card + PIN)

Inside Push Button (IPB)

Press IPB to lock (privacy disabled)
Press IPB to unlock (privacy disabled)
Door closed, IPB pressed to engage Privacy
(privacy enabled)
Door closed, IPB pressed to disengage Privacy
(privacy enabled)
Door locked (privacy enabled or disabled)
For troubleshooting, visit www.schlage.com/support.

LED REFERENCE

Condition
Condition

TROUBLESHOOTING

2 red blinks
4 red blinks
Solid red while clearing memory, then
one-second solid green when complete.
9 left red blinks
9 right red blinks
green blinking during relock delay, then 1 red
blink on relock
2 green blinks
1 red blink
Left green solid
Left green blinking
Mode 0 only: 5 left red with right green blinks
then solid right green.
1 red blink
1 green blink
4 red blinks
4 green blinks
One red blink every 15 seconds for first 10
minutes, then one red blink every 30 seconds for
the next 50 minutes, then one red blink every 60
seconds after one hour
© 2010 Ingersoll-Rand Company
P516-130 ENG online Rev. 02/10-b1
Lights
Lights