Checking Brake Pads For Wear; Throttle Cable Adjustment - Ducati Monster S4R Owner's Manual

Checking brake pads for wear (fig. 49)
Front brake
To facilitate inspection without removing the pads from
the calipers, brake pads have a wear mark. If the grooves
in the friction material are still visible, the pad is still in
good condition.
Rear brake
Friction material on each pad must be at least 1 mm
thick.
Important
Have the brake pads replaced at your Ducati
dealer's shop or authorized workshop.

Throttle cable adjustment

The throttle twistgrip must have a free play of 2 - 4 mm,
measured at the edge of the twistgrip and at all positions
of the handlebars. If it needs adjusting, use the suitable
adjuster (1, fig. 50) provided on the throttle control.
➤
1
1 mm
fig. 49
fig. 50
49
E