Left Switch; Clutch Lever - Ducati Monster S4R Owner's Manual

Left switch (fig. 11)
1) Dip switch, light dip switch, two positions:
position = low beam on;
position = high beam on.
2) Switch = 3-position turn indicator:
centre position = OFF;
position = left turn;
position = right turn.
To reset turn indicators, turn switch to central position
and push in.
3) Button = warning horn.
4) Button = passing.
5 4 6 1
3 2
fig. 11
Clutch lever (fig. 11)
Lever (5) disengages the clutch. It features a ring nut
adjuster (6) for lever distance from the twistgrip on
handlebar.
To set lever distance from twistgrip, push lever (5) fully
forward and turn the ring nut adjuster (6) to one of its
four positions. Remember that position no. 1 gives
maximum distance between lever and twistgrip, whereas
lever and twistgrip are closest when adjuster is set to
position no. 4.
When you pull in the lever (5), you will disengage the
engine from the gearbox and therefore from the driving
wheel. Using the clutch properly is essential to smooth
riding, especially when moving off.
Warning
Set clutch and brake lever when motorcycle is
stopped.
Important
Using the clutch properly will avoid damage to
transmission parts and spare the engine.
Note
It is possible to start the engine with side stand
down and the gearbox in neutral. When starting the bike
with a gear engaged, pull the clutch lever (in this case the
side stand must be up).
E
19