Table of Contents
Advertisement
1.
INSTALLATION INSTRUCTIONS
1.1
OPTIONAL ACCESSORIES
The following kits can be used with this appliance:
i.
#700ZCK Zero Clearance Kit – Required for use
with a new zero clearance type installation (See
possible installations section following).
ii.
#710CFK Circulating Fan Kit – Operated by a
variable speed controller. It is designed to boost the
natural convection process through the Legend. The
circulating fan may be installed before the Legend is
installed or retrofitted at a later date.
iii.
#720PVC Power Vent Conversion Kit – Designed to
boost ventilation in environments where conventional
gravity ventilation may, at times, give a low pull. This
kit will be required for sidewall venting (See possible
installations section following). The power vent system
may be used in combination with either the #700ZCK
or #730FSK kits.
iv.
#677FSK 4" Black Beveled Trim - Covers 25
1
x 39
/
" wide.
2
v.
#740 Beveled Brass Outer Trim – Optional brass trim
for use with #677FSK.
1
vi.
#678FSK 2
/
" Black Contoured Trim – Covers
2
1
1
23
/
" high x 36
/
" wide.
2
2
1
vii.
#679FSK 2
/
" Etched Champagne Contoured Trim
2
1
– Covers 23
/
" high x 36
2
viii.
#2945 Brass Closure Plate – Extends trim to cover
29" high x 45" wide.
Fig. 2 Appliance dimensions & clearances to combustible materials
1
/
" high
2
1
/
" wide.
2
1.2
POSSIBLE
INSTALLATIONS
This appliance can be
installed either:
i.
As an insert in an
existing solid fuel
type fireplace with a
chimney and 4" dia.
liner – See figure 1.
The fireplace must be
built in accordance
with the national,
state, provincial or
territorial building
code recognized by
the authority having
jurisdiction, or, in the
absence of such a
code, in accordance
with the National
Building Code of
Canada or the National Fire Protection Association
Code in the USA. The size of the fireplace recess must
be sufficient to accommodate the fireplace case as
shown in figure 2.
The chimney must be swept and both chimney and
fireplace checked for soundness before installation of
the appliance.
The liner must be a type approved by the enforcing
authority and installed in accordance with the liner
manufacturer's instructions.
3
Fig.1 Fireplace with liner
Hide quick links:
Advertisement
Table of Contents
