Electrical Connection And Other Rear Panel Elements Of Ndr-Ba4416 Dvr - Novus NDR-BA2208-II User Manual

NDR-BA2208-II, NDR-BB2208, NDR-BA2416, NDR-BA4104-II, NDR-BB4104, NDR-BA4208
STARTING THE DEVICE

2.7. Electrical connection and other rear panel elements of NDR-BA4416 DVR.

12 1
11
1. I/O Terminal block: Input, output and RS-485 port .




2 LAN:
3. USB:
4. HDMI MONITOR: Main monitor connectors, use the HDMI cable to connect to a 1080p 60Hz
5. VGA:
6. VIDEO OUT:
7. SPOT OUT:
8. VIDEO IN:
9. AUDIO IN:
10. AUDIO OUT:
11. POWER SWITCH: DVR power switch.
12. DC12V:
13. FAN:
Note:
OSD menu will be displayed on the VGA monitor by default. To switch the OSD display from VGA to
HDMI or BNC, please press and hold the ESC button for 5sec.
and NDR-BA4416
User's manual (short) ver.1.3
9 4 5 3
6
10 7
RS-485: two RS-485 bus ports for connecting external keyboard (K/D:
A+, B-) and PTZ cameras (P/Z: Y+, Z-)
ALARM IN: 16 alarm inputs, which may be set either as normally open
(N.O.) or normally closed (N.C.). In order to detect the alarm, signal
should last for minimum 0.5sec .
ALARM OUT(NO, COM): Alarm relay output, max. load capacity of
the outputs is 0,5A/125VAC and 1A/30VDC.
+5V, GND: Alarm indicator power supply, feeding +5V
RJ-45 connector port for connecting to the local network and internet.
USB 2.0 port for external Flash memory and mouse connection.
(1920x1080) monitor.
Main monitor connector, VGA type. Please use signal cable provided with
the monitor when using aforementioned connection type.
Main monitor connectors,
SPOT monitor output, allowing to display any camera/sequence of cameras
full screen.
16 video inputs for connecting video signal sources to the DVR.
Audio (mono) inputs for connecting microphones with pre-amplifiers
Audio out port for connecting local speaker with pre-amplifier.
12V DC power socket for connecting included power adaptor.
Cooling fan, do not cover!
All rights reserved © AAT Holding sp. z o.o.
2 8
17
13