Starting The Device; Electrical Connection And Other Rear Panel Elements Of Ndr-Ba2208-Ii Dvr - Novus NDR-BA2208-II User Manual

NDR-BA2208-II, NDR-BB2208, NDR-BA2416, NDR-BA4104-II, NDR-BB4104, NDR-BA4208

STARTING THE DEVICE

2. STARTING THE DEVICE

2.1. Electrical connection and other rear panel elements of NDR-BA2208-II DVR

1. RS-485:
Note:
Only one of the devices may be connected at a time.
2 LAN:
3. USB:
4. VGA:
5. VIDEO OUT:
6. VIDEO IN:
7. AUDIO IN:
8. AUDIO OUT:
9. DC12V:
10. HDMI MONITOR: Main monitor connectors, use the HDMI cable to connect to a 1080p 60Hz
Note:
OSD menu will be displayed on the VGA monitor by default. To switch the OSD display from VGA to
BNC, please press and hold the ESC button for 5sec.
and NDR-BA4416
User's manual (short) ver.1.3
7 6
one RS-485 bus port for connecting external keyboard or PTZ cameras
(RS485: A+, B-)
RJ-45 connector port for connecting to the local network and internet.
USB 2.0 port for external Flash memory and mouse connection.
Main monitor connector, VGA type. Please use signal cable provided with
the monitor when using aforementioned connection type.
Main monitor connectors,
8 video inputs for connecting video signal sources to the DVR.
Audio (mono) inputs for connecting microphones with pre-amplifiers
Audio out port for connecting local speaker with pre-amplifier.
12V DC power socket for connecting included power adaptor.
(1920x1080) monitor.
All rights reserved © AAT Holding sp. z o.o.
8 5 4
11
10 2 3 9 1