3-1. No image is displayed on the personal computer
(referred to as PC hereafter) (When the Power LED is lit)
No image is displayed on
the PC.
Is the image normally
displayed on the color monitor?
Yes
Go to C (page 3-5)
Is a voltage of 12V
input to 1-pin of CN1001 on the
MDR-19 board?
Yes
Are CN1001,
FB1004, FB1005, TH1001,
TH1002, IC1001, IC1002 and IC1003
on the MDR-19 board
correctly soldered?
Yes
Replace the MDR-19 board.
SNC-RZ30N/RZ30P (E)
Section 3
Troubleshooting
Are the initial operations
No
of the pan and tilt performed when
the power is turned on?
Go to B (page 3-4)
In the case that PC image, TV picture and motor operation are all NG
No
Go to A (page 3-2)
No
Solder the parts that are
not correctly soldered.
No
Yes
3-1