Table of Contents
Advertisement
Troubleshooting
If there are problems in operation, please refer to the items below. If the problem
persists, please contact the agent you purchased this product from.
Problems
Troubleshooting
Nothing appears on the
• Please check the power connection.
screen.
• Please check the video signal line connection.
• Please check and make sure that the auto lens
switch is set to DC (VIDEO) when using a
VIDEO(DC) lens.
The video image is not
• Please check if the lens is clean.
clear.
Please clean the lens with a clean cloth or
brush.
• Please adjust the contrast feature of the
monitor.
• Please make sure that the screen is not
exposed directly to a bright light.
Please move the camera if necessary.
• Please readjust the back focus of the camera.
The screen is dark.
• Please adjust the contrast feature of the
monitor.
• If you have an intermediate device, set the 75 /
Hi-z properly, and check the terminals.
• Please check if an auto iris lens is being used
and adjust the brightness level.
There is a problem with
• Please check if an appropriate power source to
the camera operation.
the camera complies with the manufacturer's
The camera surface is
standard requirement, or if the voltage keeps
too hot and black stripes
changing.
appear on the screen.
34
Digital Day&Night Color Camera
Problems
Troubleshooting
The MOTION
• Please check if 'MOTION DETECTION' mode
DETECTION function is
is turned on.
not working.
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
Colors are not quite
• Please check the 'WHITE BAL' setting.
right.
(Please refer to page 23)
The screen is
• Please check if the camera is facing directly into
flickering.
sunlight or fluorescent light.
• Please check if an auto iris lens is being used.
• Please check the connection of the lens
connector cable.
L/L mode isn't able to
• Have you connected your camera to DC power
be selected.
source? Connect it to AC power source.
L/L mode is not
• Please check the frequency of power supply
available.
(60Hz for NTSC, 50Hz for PAL).
COLOR mode is not
• Please check if the AGC menu is set to the
working.
OFF position.
SENS-UP function is not
• Please check if the AGC menu is set to the
working.
OFF position.
• Please check if the SHUTTER menu is set to
MANUAL mode.
35
Digital Day&Night Color Camera
Advertisement
Table of Contents
