GMB Spectrolino Operation Manual page 8

2
General
6
EN
- Spectrolino and SpectroScan/SpectroScan T should only be operated by
trained personnel. Operation by untrained personnel may result in
damage to the equipment and/or inaccurate data.
- The Spectrolino and SpectroScan/SpectroScan T must be installed on a
stable horizontal surface, unexposed to sunlight and moisture.
- Both devices must be protected against chemical agents, corrosive
vapors, strong vibration and mechanical impact.
- Use only GretagMacbeth accessories and spare parts.
- Before turning ON the SpectroScan/SpectroScan T, ensure that no
objects are leaning or resting on the equipment.
- The electrostatic plate of the SpectroScan/SpectroScan T should be
cleaned with Isopropyl alcohol on clean cloth. Alkaline solvents and soap
should never be used to clean this plate.
- The plastic housings of both the SpectroScan/SpectroScan T and the
Spectrolino should be cleaned with soap and water on a damp cloth.
- The operator should familiarize himself with all operating specifications
contained in Chapter 6 before turning on the equipment.
- The equipment must be transported in its original packaging.