GMB Spectrolino Operation Manual page 29

In the dialogue window that follows, it is possible to define the name and type of file,
as well as the place in which it is to be saved. Confirm settings by clicking
The test chart to be measured is then loaded. The video representation of the test
chart serves as a visual control during the measurement process.
To permit the SpectroScan to position the measuring device over the fields to be
measured, it is necessary to specify the dimensions and position of the test chart.
Reply to the question regarding positioning of the sheet. The video
Yes
representation now shows the three positions that must be reached manually with
the Spectrolino. The predefined sequence must be respected.
Using the SpectroScan field command cursor keys (36)
tioning device grid (30) entirely covers the 1st measure-
ment field completely. To check positioning, the Spectrolino
may be lowered onto the measuring surface and then
raised by means of the
the 1st measurement field are transferred to the software
when the
for the 2nd and 3rd fields, proceed as described above.
After having inserted the last position, an absolute white calibration of the Spectrolino
is performed automatically, and the automatic data reading procedure is started. The
process is displayed on the video screen, and may be interrupted at any moment.
- The procedure described may vary according to the type of software
being used.
, position the measuring device so that the posi-
key. The coordinates of
Up/Down
key is pressed. To enter the readings
Enter
.
O.K
SpectroScan
4
operation
27
EN