Reset - GMB Spectrolino Operation Manual

3.4.3 Reset

Position the Spectrolino on the calibration plate (19) with the white reference incor-
porated (17). Keep the measurement key (10) depressed for ten seconds. Following
the acoustic signals indicating simple control measurement and absolute white cali-
bration, a sequence of four tones indicates imminent reset. At this point there will be
two tones in rapid succession, that are repeated after a pause. The measuring device
is restored to the original basic settings only after the fifth long tone.
- Resetting must always be performed if any anomalies occur in the link
between software and the Spectrolino, or if the results of measurement
cannot be reproduced. (see chap. 3.5 Diagnostics).
Spectrolino
3
operation
17
EN