Connection to Macintosh
SpectroScan
- To avoid confusion, compare the item code of your cable with the
indications given in the corresponding overview.
- Check the DIP-switches configuration (see page 23) on the back of the
measuring table.
- Connection to the main power supply (customer outlet) must be made
with the cable supplied.
Before turning on the power to the SpectroScan, the Spectrolino must be attached by
the following procedure:
Point 1: Mount the white reference (17) from the Spectrolino into the
upper slot (38) of the SpectroScan.
mini-DIN cable
(36.50.54)
Point 2:Insert the positioning device (41) on
the Spectrolino so that it locks into position.
Point 3: Insert the
Spectrolino into the tab (44)
on the SpectroScan until it
locks into position.
SpectroScan
4
operation
25
EN