Use - GMB Spectrolino Operation Manual

3.4

Use

The Spectrolino is equipped with a single measurement key (10). With this key you
are able to actuate a measurement, as well as performing an absolute white
calibration with automatic filter recognition or restoring the measuring conditions
to the original factory settings.
The Spectrolino has the ability to measure reflectance, both manual and automatic,
as well as take emissive measurements. Depending upon the software employed,
the instrument can be attached to the SpectroScan/SpectroScan T, the positioning foot
(22), or the monitor support (25) by sliding the instrument into the insertion slot (16)
or the centering pins (13) on the SpectroScan/SpectroScan T.
- Be sure to check that the tabs (24) are securely fastened and locked
down to the measuring foot (22) or the monitor support (25) before
operation. This should also be checked when mounting on the
SpectroScan/SpectroScan T. To unlock the instrument, press in and hold
down the release keys (12) on both side of the intrument.
As the Spectrolino is not equipped with any display, its functions, such as mea-
surement, absolute white calibration, etc. are confirmed by acoustic signals. The
various tone sequences are described and illustrated with the various functions.
Spectrolino
3
operation
13
EN