Usb Connector 0/1 (Usb0/1) - Kontron KTD-N0850-B User Manual

KTD-N0850-B

5.3.1 USB Connector 0/1 (USB0/1)

USB Ports 0 and 1 are mounted together with DP0 port and supports USB3.0/USB2.0.
Note Type
1 PWR
PWR
1 PWR
PWR
Note 1: In order to meet the requirements of USB standard, the 5V input supply must be at least 5.00V.
Signal Description
USB0+ USB0-
RX0+ RX0-
TX0+ TX0-
Differential pair works as Data/Address/Command Bus.
USB1+ USB1-
RX1+ RX1-
TX1+ TX1-
5V supply for external devices. SB5V is supplied during powerdown to allow
5V/SB5V wakeup on USB device activity. Protected by resettable 2A fuse covering both USB
ports.
Page 32
Signal
IO USB1-
5V/SB5V 1 2
IO RX1- 5 6
IO RX1+
IO USB0-
5V/SB5V 1 2
IO RX0- 5 6
IO RX0+
IO-Area Connectors
PIN Signal Type
USB1+ IO
3 4 GND PWR
7 8 9 TX1+ IO
TX1- IO
GND
USB0+ IO
3 4 GND PWR
7 8 9 TX0+ IO
TX0- IO
GND
KTQM77/mITX Users Guide
Note