Section 4: Operations - Grizzly T10875 Owner's Manual

SECTION 4: OPERATIONS

To reduce your risk of
serious injury, read this
entire
using machine.
Eye and face injuries and respiratory prob-
lems can occur while operating this tool.
Wear personal protective equipment to
reduce your risk from these hazards.
Keep hair, clothing, and
jewelry away from mov-
ing parts at all times.
Entanglement can result
in death, amputation, or
severe crushing injuries!
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
-16-
manual BEFORE
To complete a typical operation, the operator
does the following:
1.
Examines workpiece to make sure it is suit-
able for grinding or buffing.
2.
Selects correct wheel for type of operation,
inspects wheel, performs a "ring test" (on
grinding wheel), and installs wheel.
3.
Verifies/adjusts tool rest position so it is per-
pendicular to wheel and gap is
verifies/adjusts spark deflector so wheel gap
is ⁄ " to ⁄ ".
1 1
8 4
4.
Positions safety shield for safe grinding.
5.
Ensures that ON/OFF switch is in OFF posi-
tion, and connects grinder to power.
6.
Puts on personal protective equipment.
7.
Stands aside, starts grinder, and allows it to
reach full speed and operate for at least one
minute to ensure grinding wheel does not fly
apart from centrifugal force of rotation.
8. Places workpiece on tool rest and positions it
for grinding or buffing.
9. Operator gradually feeds workpiece into
wheel and moves workpiece left and right.
10. After grinding operation is complete, quench-
es workpiece as required to prevent surface
hardening or temper loss.
11. Stops bench grinder.
Model T10875 (Mfd. Since 01/15)
⁄ " to ⁄ ";
1 1
16 8