Buffing Compound Selection; Installing/Removing; Buffing Wheel - Grizzly T10875 Owner's Manual

Buffing Compound
Selection
Most colors of abrasives have similar applica-
tions, but always check with the manufacturer of
your particular compound.
Grizzly offers the following compounds:
Red Rouge — Made for fine polishing on brass
and gold. Provides an excellent shine when used
with the loose muslin buffing wheel.
Green (Extra Fine) — Great for extra-fine pol-
ishing on most metals to bring out that mirror fin-
ish. Works best with loose muslin and spiral
sewn buffing wheels.
White — Great for ivory, plastic and resins when
used successively with the soft spiral sewn and
soft airway buffing wheels.
Black — Designed to be used with sisal and air-
way hard buffing wheels, this compound is per-
fect for the initial rough cut on stainless steel and
iron.
Tripoli — A true middle-of-the-road abrasive,
Tripoli provides an excellent medium cut for
brass, aluminum and zinc alloy.
Green (Fine) — Slightly more abrasive than the
extra-fine green, this green compound is great
for a medium-to-fine polish with most softer
metals.
-22-

Installing/Removing

Buffing Wheel

This grinder has a left and right shaft to provide
the option of mounting grinding or buffing acces-
sories, depending on your application.
Safety shield must always be installed for
grinding operations. Failure to do so may
result in serious personal injury.
To install/remove buffing wheel:
1.
DISCONNECT MACHINE FROM POWER!
2.
Loosen (3) M4-.7 X 10 Phillips head screws
with captive flat and lock washers holding
wheel guard in place (see Figure 14 on Page
19).
3. Remove outer guard (see Figure 14 on Page
19).
Model T10875 (Mfd. Since 01/15)