Assembly Instructions - Kärcher HD 2.8/10 ST Ed B Operator's Manual

Spray
Gun
Safety
Latch
High Pressure
Hose
STEP 1: Attach the high pressure
hose to the spray gun using teflon
tape on hose threads. Use safety
latch to prevent from opening.
STEP 4: Connect garden hose to
the cold water source.

ASSEMBLy INSTRUCTIONS

STEP 2: Insert nozzle into coupler.
Inlet
fitting
STEP 5: Connect the high pressure hose to the outlet
discharge fitting. Push coupler collar forward until secure.
Connect the garden hose to pump water inlet. Inspect
inlets. CAUTION: Do not run the pump without water
or pump damage will result.
9.800-086.0 • Rev. 01/08
Nozzle
STEP 3: Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
Outlet fitting
Coupler
7