Assembly Instructions - Kärcher 1.575-615.0 Operator's Manual

High Pressure
STEP 1: Attach the high pres sure
hose to the spray gun using tefl on
tape on hose threads.
STEP 4: Connect the high pres sure
hose to the pump discharge fi tting.
Push coupler collar forward until
se cure.
Due to Federal Reg u la tions con cern ing ship ment of
cor ro sive chem i cals, bat ter ies are not shipped with
this ma chine.
DANGER/ POISON
SHIELD
EYES
NO
EXPLOSIVE
SPARKS
GASES
CAN CAUSE
FLAMES
BLINDNESS OR INJURY SMOKING
KEEP OUT OF THE REACH OF CHILDREN. DO NOT TIP. KEEP VENT CAPS TIGHT AND LEVEL.
Local purchase of battery will be the responsibility of
the owner. Au to mo tive type 12 Volt Group 24 bat tery
is rec om mend ed for place ment with in the weath er
re sis tant box. Fol low safe ty and in stal la tion in struc-
tions fur nished with the bat tery.
8

ASSEMBLY INSTRUCTIONS

High Pressure
Spray
Gun
Wand
Hose
STEP 2: Remove Wand end and
first place the the high pressure
nozzle as shown. Replace end of
wand.
STEP 5: Connect garden hose to
the cold water source.
BATTERY INSTALLATION
FLUSH EYES
IMMEDIATELY
WITH WATER
SULFURIC GET
MEDICAL
ACID
CAN CAUSE HELP
BLINDNESS OR
FAST
SEVERE BURNS
9.800-103.0 - M • Karcher HDS 615-617
Nozzle
Red Ca ble is at tached to bat tery (+) pos i tive ter mi-
nal, black ca ble is con nect ed to bat tery (-) neg a tive
ter mi nal.
Black - Negative
Terminal
Red + Positive
Terminal
STEP 3: Remove shipping cap and
install oil dipstick. Check pump oil
level by using dipstick or observe
oil level in oil window (if equipped).
Use 30 wt. non detergent oil.
Water
Inlet
Garden
Hose
STEP 6: Check inlet filters, re-
move debris, then connect the
garden hose to pump water inlet.
CAU TION: Do not run the pump
with out wa ter or pump dam age
will result.
98001030-8