Casio QT-6600 Service Manual page 53

[ 6 ] FLASH ROM WRITE/READ Test
[Function]
Tests whether writing/reading to FLASH ROM is correctly performed.
This test targets all areas except for the data protection areas.
Be sure to perform "[5] FLASH ROM CLEAR Test" before this test. If other tests are performed
without having conducted FLASH ROM CLEAR test, this program may be damaged and may not
operate properly. Should this occur, perform all operations starting from IPL.
[Operation]
Operation : c
c: Specifying FLASH ROM
0 FLASH ROM (for programming)
1 FLASH ROM (for hibernation)
n: Number of times
0 or no value
A value other than 0 (1 ~ 9) Tests repeat infinitely (press ESC to terminate)
[LCD]
FLASH ROM (for programming)
FLASH
FLASH WR
END
FLASH ROM (for hibernation)
FLASH hib
FLASH hib WR
END
n 0 1 2 ST
To perform a single test
0n012
OK
0n012
1n012
OK
1n012
— 50 —
[PRINT]
FLASH
FLASH WR
END
* If the test ends with errors, the line number
and the address are printed instead of OK
message.
FLASH hib
FLASH hib WR
END
* If the test ends with errors, the line number
and the address are printed instead of OK
message.
0n012
OK
0n012
1n012
OK
1n012