Casio QT-6600 Service Manual page 10

Program restoration
I N I T 1 0 - 1 0 - 0 1 1 2 : 3 4
AUTO PGM
1 . N o R e s t o r e / R e c e i v e
2 . P G M R e s t o r e ( C F C a r d )
3 . P G M R e c e i v e ( I n l i n e )
• Restore from CF card.
Insert the CF card into the slot and select the appropriate file and press the <YES> key.
• Program receive from other terminal.
I N I T 1 0 - 1 0 - 0 1 1 2 : 3 4
Receive Data
PGM Receive from
OK?
2-2. How to initialize the terminal (add / replace one terminal)
Preparation:
1. All peripheral devices and terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to this terminal.
3. Connect the added / replaced terminal to inline.
Operation:
Follow the steps shown on the page 5 to 7.
0 0 0 0 0 1
———
———
———
0 0 0 0 0 1
——— All Data (including totalizer) / All PGM (program only)
All PGM
MC #05
——— Select the machine to send the data.
YES
Select, if no need to download any data.
Select to download a program data from CF card.
Select to download a program data from other terminal.
— 7 —