Tests; Reader; Buzzer; Lcd & Led - CipherLab 8700 Series Reference Manual

8700 Series Mobile Computer

3.3 TESTS

Provides a variety of functional tests on the mobile computer's key parts.

3.3.1 READER

Launches the test on the scanner's reading performance. Symbologies supported depend
on the scan engine you use. Refer to
default. Symbologies disabled by default can only be enabled through programming.
Press the [SCAN] key to start testing. To stop and quit the test, press any key.

3.3.2 BUZZER

Launches the buzzer test with different frequency/duration combinations.
To stop and quit the test, press any key.
3.3.3 LCD & LED
Launches the test on the LCD display and LED indicator.
To stop and quit the test, press any key.

3.3.4 KEYBOARD

Launches the test on the keypad's rubberized keys. Press any key to see if the
corresponding character display on the screen.
To stop and quit the test, press [ESC].

3.3.5 MEMORY

Launches the test on the mobile computer's data memory (SRAM). The results will
display on the screen.
To stop and quit the test, press [ESC].
Warning! The contents of the data memory (SRAM) will be wiped out after test.
52
Reference Manual
1.6 Data Capture for the symbologies enabled by