Detaching And Refitting The Scanner Home Position Sensor - Kyocera FS-1016MFP Service Manual

(6) Detaching and refitting the scanner home position sensor

<Procedure>
1. Remove the optical module unit (See page
P.1-5-24).
2. Remove the CCD cover.
3. Remove the one connector.
4. Remove the one screw and then remove the
scanner home position sensor.
5. Check or replace the scanner home position
sensor and refit all the removed parts.
Optical module unit
Screw
Connector
Optical module unit
Hook
CCD cover
Figure 1-5-46
Scanner home
positon sensor
Figure 1-5-47
2G4
Stopper
1-5-35